If you are looking for the best garage lighting, you may have gone to the home improvement center and even talked to an electrician.
However, after you start pricing the lighting options available locally and then go over the electrician’s estimate of how much it will cost to install shop lighting in your garage, you may put off any decisions about the lighting you need to turn your garage into a useable workspace.
There are less expensive options for garage or workshop lighting, though. These lights are mainly found online and are a less expensive alternative to what you might find at the home improvement center.
These are LED integrated light fixtures and they are ready to install right out of the box.
There is also no electrician needed, as these are referred to as plug and play lights, meaning that all you have to do is hang them and then plug them into an outlet to use them. LED integrated light fixtures are an affordable breakthrough for shop lighting.
Barrin, Hyperikon, and Sunco are the top brands of the garage manufacturing industry. These are lightweight, self-contained, and easy-to-handle garage lights that come with all of the hardware and instructions needed to install them yourself.
By the way, you can check out what are the best garage door openers on the market today in our other article.
Top 10 Shop Light/Garage Light Comparison Table
Since they are LED lights, they have a 50,000-hour lifespan and are brighter and better functioning than traditional fluorescent lights. This kind of LED light fixtures can also save you about 60 to 75% on your electric bill.
Plus, they are much less expensive and come in packs of 2 to 10 light fixtures that also connect together to fill your whole garage with brilliant and evenly-distributed white light.
If you have never purchased do-it-yourself garage lights before, here are ten of the top-rated lighting packs for your garage or basement.
This is valuable information that helps you choose the right lighting for your garage. If you have the interest to check top 10 truck tool box on the market today on our previous guide.
10 Best Garage Lighting Reviews – Top Rated LED Shop Lights For Garage
01. Barrina LED T5 Integrated Fixtures (Pack of Six) – Variety of Uses for Home and Commercial Space
This six-pack of general-purpose Barrina LED T5 integrated fixtures has many different uses for commercial as well as home spaces.
These LED lights are lightweight, as the housing is made of aluminum and high-quality PC, so they can be installed anywhere.
The hardware includes easy-to-hang snap joints that make these LED lights a plug-and-play installation. Each 59” power cord has a separate on/off switch to operate it.
These LED lights are bright, with a 2,200 lumens output per light. However, with a low energy consumption of 20w per light, these lights will not run up your electric bill.
They are also versatile in the fact that they can be seamlessly connected and used together for a powerful source of light, or they can be used separately, like under a cabinet. Everything for mounting and use is included in this inexpensive and multipurpose utility lighting kit.
02. Hyperikon Linkable LED Double-Tube Shop Light – A Pro-Quality Shop Light That Installs in Minutes
The Hyperikon linkable LED double-tube shop light provides a bright light with no flickering for sharp focus (without headaches or eyestrain) in a shop environment.
These shop lights have versatile mounting options and can be fitted flush against the ceiling, suspended, or daisy-chained together. Each light comes with all the necessary installation hardware and is quick and easy to put up in 10 minutes.
This LED double-tube shop light comes with a built-in pull chain so it turns on and off conveniently. The housing is made of commercial-grade rugged steel and the average life of the LED light is 50,000 hours.
These modern-style lights are linkable and can save you up to 62% on your electric bill while still putting out a bright enough light for work, but no so overpowering as to be distracting.
03. Sunco Lighting LED Integrated Fixtures (Pack of Six) – Lightweight and Bright Light for Large Spaces
The Sunco Lighting six-pack of LED integrated fixtures are the ideal way to add bright and instant light to any workspace including basements, garages, storage areas, tool sheds, and warehouses.
They are versatile in the fact that you can link four together to one power source for illuminating a large area or use them separately.
They can also be suspended from a higher ceiling or mounted directly onto a lower ceiling in a basement. All of the mounting hardware is including, along with a 10” pull chain and a 5’ power cord.
These contemporary-style Sunco Lighting utility shop lights are shock and vibration resistant. They are energy-conserving and last for 50,000 hours of use.
They are also easy to modify and hardwire for various wall-mounted light switches and even Bluetooth if you want a more convenient way to turn them on and off.
04. Hypergiant LED T5 Integrated Fixtures (Pack of 8) – Sleek, Lightweight Design for Home and Office
The Hypergiant LED T5 pack of eight tube lights will absolutely brighten any work or office space with a sleek modern look.
These elegantly squared-off tube lights also come with all of the installation hardware: including a 4-pack of power cords with on/off switches, 8 small connectors, and connecting cords (6 x 20” plus 4 x 50” long).
These are highly energy-efficient and highly effective integrated fixtures, with a long lifespan that will outlast and outperform conventional lighting.
The housing of these tube lights is made of 0.3 mm aluminum, which makes them lightweight and easy to put up. The light fixtures themselves are squared-off, which is what makes them attractive to hang in a home or office situation and also gives then their stylish look.
05. Sunco Lighting LED Integrated Fixtures (Pack of Ten) – Bright Lighting for Cavernous Work Spaces
The Sunco Lighting ten pack of utility shop lights with the frosted lens are commercial grade, long-lasting LED lights that are also top-rated and energy-efficient.
This ten-pack includes all the installation hardware you need for a variety of options. These lights can be installed flush against any surface or suspended from the ceiling with the included mounting chains, anchors, and ceiling hooks.
For an extendable design, this 10-pack also includes 10 x 5’ linkable power cords to daisy chain the lights, with a maximum of 4 lights per power source. The lights are frosted and each light comes with a 10” pull chain to switch it on and off.
06. Oooled Modern LED Linkable Shop Light – A Bright Lighting Solution for Dark Corners
The Oooled modern LED shop light has a high-reflectance, specular aluminum surface on the interior of the housing that produces 95% reflectivity for a fully illuminating effect. The exterior of the housing has a white finish and a frosted PC cover.
This integrated fixture can be mounted flush to the ceiling or suspended with the included hooks and chains. It can also be linked up to additional lamps with included plug connections. The Oooled LED shop light also comes with a convenient pull cord to turn it on and off.
This light is very easy to install with the hardware included and comes with an explicit instruction book that explains the different installation options. It is also mercury-free and does not emit UV rays like fluorescent lights.
07. Sunco Lighting LED Utility Shop Light (Pack of 2) – Dependable Lighting That Is Easy to Install
The Sunco Lighting LED utility shop light is an integrated fixture that never needs changing as it has a lifespan of 50,000 hours.
This is a benefit for people who need extra light in a workspace and don’t want to hassle with fluorescent lighting. Plus, because it is so lightweight, it is easy to install either directly on a ceiling or right under a cabinet.
Or, if you have higher ceilings, you can suspend it with the included chains and hooks. Either way, this is a bright light that will provide daytime lighting for any workspace in your home or garage.
This pack of two utility lights can be easily daisy-chained (up to four) for larger commercial workspaces or warehouses so that one switch (18.5 inches on/off pull chain included) will turn them all on. This is a dependable light that is also ETL listed and Energy Star approved.
08. Hykolity LED Shop Light (Pack of 4) – Quick Turn-On, Super Bright Lighting for Workspaces
The Hykolity LED shop light for workspaces will brighten any basement, workshop, warehouse, or garage. These are modern-looking tube lights with aluminum construction and a PC plastic shade. This makes them lightweight for easy installation and yet still very bright to make any workspace more functional.
Each of these lights will light a 7’ x 7’ area when installing in an 8-10’ ceiling. So this 4 pack will light an area of 28’ x 28’ for a lifespan of 50,000 hours.
These lights can also be daisy-chained so multiple lights can be turned on with one switch. This four-pack includes all of the hardware to either mount the lights flush to the wall or suspend them from the included chains, hooks, and anchors. On/off pull chains also included.
09. Leonlite LED T8 Double-Tube Shop Light (Pack of 4) – Brilliant White Light and Seamless Connections
The Leonlite LED T8 double-tube shop lights are everything you would expect if you are replacing fluorescent lighting with something more energy-efficient.
These LED lights have instant turn-on with no flickering and provide glare-free light that is well-balanced and bright.
If you are using these lights in a commercial space, they can be connected seamlessly and then either suspended or mounted to the ceiling, which gives you more flexibility with regards to installation.
These lights are plug and play for quick installing and use 60% less power than traditional fluorescent lighting.
This is a modern-looking light, with a white, durable PC lampshade and a PVC backing plate with all the hardware included.
The on/off pull chain is 18.5” for easy operation and the included power cord is 5.12’ for convenient connections between lights, especially if they need to be spaced out when they are connected together.
You can connect five units together in a single run to enjoy over 50,000 hours of energy-saving brilliant lighting.
10. Bbounder LED Shop Lights for Garage (Pack of 4) – Brilliant White Light with Even and Full Coverage
With energy savings of up to 75%, the Bbounder LED shop lights for the garage are an ideal replacement for fluorescent lighting in any garage, commercial space, or basement. Installation is quick, and all of the hardware required for suspended or flush mounting is included.
These lights are bright enough to light any workspace and flood it with the brilliant and even light necessary to work on car engines and other home improvement projects that require being able to see what you are working on from all angles.
What You Need to Consider to Find the Best Garage Lighting for Your Needs
Newly-designed modern LED lights are energy-efficient replacements for old and outdated fluorescent fixtures.
They are affordable, put out brilliant white light, are lightweight, and easy to install. However, along with new lights comes new technology and new terms.
Other than how bright they are, it may seem like all lights are the same, but this is far from the case. Unlike traditional lightbulbs (like the ones you might use in a lamp to light a room in your house), LED fixtures are new technology, and there are other things to consider when you purchase them.
So it is important to learn about this new lighting technology and how it can benefit you and your workspace before you go online and purchase an LED lighting pack.
That said, here are some explanations of LED terminology and other things to consider before you purchase new garage lights.
Lumens vs. Watts
One of the factors to consider is the number of lumens an LED bulb puts out as opposed to watts. You will notice that most LED lights are sold according to the number of lumens, although the watts used may be listed. So what are lumens and what do they have to do with watts?
Lumens are the new way the brightness of a light bulb is measured. The number of lumens, simply put, is the total measure of light visible to the human eye when it comes from a light source like a lamp.
You will notice that most LED lights for workspaces have an LED light output of about 2,000 to 4,000 or so lumens.
However, what is important to remember about LED lights is that they put out much more light (lumens) using many fewer watts. In fact, LED lights can use up to 75% less electricity than traditional light bulbs.
So by lighting your garage with LED lights whose output is measured in lumens, you will get much more bright light for much less money. You will first save money with the purchase price of the lighting itself and then save money on energy costs.
As you can see from the garage lights listed in this shopping guide, you will find that a light fixture that puts out 4,000 lumens of visible light only uses 40 watts of electricity to do it. That’s how these inexpensive shop lights can illuminate your whole garage with very little wattage.
Kelvin Rating and Color Temperature
The next factor to consider when choosing garage lighting is the color temperature or Kelvin. To put it simply, the higher the Kelvin rating means the whiter the light will be.
The whiteness of your garage lights may not mean much to you as you read this, but you will notice a huge difference in your new garage lights (once you put them up) if the Kelvin rating is correct.
Kelvin ratings for bulbs in your home are generally 2,700 to 3,500. This produces a warm to bright light for any room in your house.
However, once you get into a work situation, such as a garage, basement, or warehouse, you will need at least a 5,000 Kelvin rating to be able to see what you are doing.
This 5,000 and above rating is sometimes referred to as “daylight lighting.” This is lighting that is rated the same as if you were standing outside in broad daylight on a sunny day.
It is the bright illumination that allows you to work and see minute detail, also called blue-white light, and what you need to look for when you purchase garage lights.
Any less will not let you work on things like car engines or other do-it-yourself projects when seeing what you are doing is critical.
When you think about LED lights that are bright enough to light up a whole garage or warehouse, you may think that you need professional installation from a licensed electrician, but this is not the case if you buy the right LED lights.
The first thing you want to look for in an LED garage lighting is something called “plug and play.” What this means is that you can take the light fixture right out of the box, plug it in, and start using it immediately.
The other thing that the term plug-and-play means is that you can also connect the lights together electrically in a string so that one power switch will turn them all on at once. This is also called a daisy chain.
LED manufacturers know that you will probably use their lights in a string to light a larger space like a warehouse, so they make them so that they can connect together without any additional wiring.
With the ability to daisy chain, you can plug the first light into the outlet and the rest will light up when the first light in the string is turned on.
You can turn the first light in the string on by pulling the included on/off pull cord, or you can hardwire a light switch if you want to turn them on when you enter the room like a regular light.
If you want to install the lights yourself, another thing you will want to look for is lightweight fixtures. The original problem that many people had with installing the old fluorescent lights on their own was that the fixtures were heavy.
This meant that handling the fixtures while you installed them was difficult because of the weight. Then, because of this weight, you would need heavy-duty reinforced hardware to hold them up.
Since the old fluorescent fixtures also had to be hard-wired, it was no wonder that professionals were needed to install them.
These days, LED integrated fixtures are made with aluminum and PC plastic, so they are light to hang and easy to power with the plug and play technology.
So make sure to look for lightweight fixtures that you can easily put up yourself. As well, look for garage lights that come with all the hardware needed to install them. This will make installing your new LED lighting a short afternoon project.
This is because the hardware that is included in most LED lighting kits will let you hang your light fixtures flush against a lower ceiling like in a basement, or suspend them from a chain to hang them lower in a high-ceiling warehouse.
Frequently Asked Questions about Garage and Work Space Lighting
Although LED light fixtures are the inexpensive and long-lasting solution to lighting your garage, basement, or warehouse, they do not work the same as traditional fluorescent lighting.
So there are questions you may have before investing in them. Here are some of the more common questions that homeowners or business owners ask before they purchase LED lighting for their workspace:
What exactly is an LED light?
The letters LED are short for “light-emitting diode.” Diodes are electrical components, and when an electrical current is passed through them, the electrons inside are animated and produce photons that the human eye sees as light.
This takes a remarkably small amount of energy, which is why these lights are so energy-efficient.
These lights are so efficient that they use 75% less energy than traditional bulbs and last 25 times longer.
Purchasing an LED integrated fixture is even less expensive because the new technology allows the fixture and the bulb to be made as one unit, which allows for the “plug-and-play” installation.
What this means is that you merely plug the fixture into an outlet and you have as much bright white light as the old fluorescent bulbs, without the heat, flickering, or the hefty weight.
Multiple units can be plugged into one another and then plugged into one electrical outlet, and installation practice called “daisy-chaining.”
The low price of these self-contained light fixtures, the easy installation, the energy savings, and the long life of the bulbs are making these new LED integrated light fixtures the ideal choice for someone who wants to turn their garage into a workshop.
They are especially attractive to the commercial warehouse or retail owner who wants to save on installation and their lighting bill but still needs a bright, dependable, commercial-grade light.
How are LED lighting fixtures safe for home use?
LED lights for the garage, basement, and other workspaces are actually safer than more traditional lighting.
As far as LED lighting goes, there is less danger of flickering or the glare that can cause headaches and eyestrain when you install fluorescent lighting. Plus, LED lights do not contain mercury like fluorescent lights.
As well, LED lights don’t get hot like other kinds of lighting, so there is less danger of getting burned if you touch them while they are on. Modern design LCD lights are also very lightweight, so if they fall from the ceiling, they will do much less damage to anything they fall on.
How do LED lights save you money?
LED lights save your money in several ways. First, modern LED integrated fixtures save you money because they are much less expensive than their fluorescent counterparts.
And even with the lower price, an integrated fixture is still an all-in-one purchase which includes the LED bulb, the fixture, and the hardware needed to install it – which you can do yourself.
There is to need to buy separate bulbs, heavy fixtures, or the hardware needed to install them. On top of this, you do not need to pay an electrician to install and wire the lights.
Second, LED lights for the garage use a lot less electricity to put out much more light. LED lights can use up to 75% less energy than other lights like fluorescent, incandescent, and halogen bulbs.
You may not see an immediate difference at home because you may not use your workspace all of the time, but if you use them in a warehouse or other commercial space, you will soon see a drop in the amount of money it costs to light up your business.
Third, LED lights for the garage have a 50,000-hour lifespan. If you install them in a basement workshop, for example, you may never need to buy a new light ever again.
That’s because, at this rate, an LED integrated fixture can last for about fifteen years. Just for comparison, incandescent bulbs only last about 2,000 hours. So, as you can see, LED integrated fixtures are a money-saving purchase.
How many LED garage lights should I purchase for my workspace?
Many people purchase LED integrated fixtures for their workspaces without understanding how bright they are, especially if they buy them according to the watts.
So many people wind up buying the wrong amount of lights – either too many, which winds up being blindingly bright – or, conversely, they buy too few and wind up ordering more.
Nevertheless, is important to order the right amount of lights in the first place. This is because if you order too many, you may not be able to return the extra ones. Ordering too few also has consequences of its own, as you may wind up with different hues of lights.
One thing to keep in mind when ordering LED lights is that they all come with an LED die (chip) that determines the exact hue of light, and these chips are made in batches.
So while the Kelvin color and temperature may be the same on the packaging, lights ordered at different times will have a slightly different hue if they come from a different batch.
So if you order lights from different batches, you may wind up with lights that project different hues of blues and greens.
So how do you figure out how many lights to order? You will first have to measure the square feet of the room you are going to light. Then you will need to measure the ceiling height.
The specifications on the lights will first tell you how many square feet each light will cover. The specifications will also tell you the maximum height of the room the light fixtures will illuminate.
Make sure to look for suspension hardware if you have a high ceiling. This will bring the lights closer to the floor so they will fully illuminate your workspace.
Once you have measured the square feet of your room and checked the specifications of the lights, you will know the correct amount to order.
A Final Thought on Finding Garage Lighting
As more and more homeowners are turning their garages and basements into do-it-yourself workshops, they are looking for affordable commercial-grade sources of lighting to illuminate these spaces.
This is because anyone who has tried to light a workshop with a regular incandescent bulb, no matter how bright, knows it doesn’t emit enough light to see in a workshop situation.
They also know that traditional florescent lighting is too expensive, and when you add on installation, it becomes unaffordable.
The new technology of LED integrated fixtures allows anyone who can plug in a light and hang a lamp, to turn a dark garage into a super-bright space where they will have enough light to see what they are working on.
As well, if the lights need to be moved, it is simply a matter of unplugging them from the wall socket and hanging them somewhere else.
This type of flexibility, along with the low-cost and the bright light is what makes LED integrated fixtures such a popular lighting choice for home workshops and garages.