When it comes to towing heavy-duty tasks, you need the best brake pads for towing. The brake pads are one of the major components of the brake system.
Basically, for such a heavy-duty task, or for hauling, you need a very good brake system, and that can only be achieved by having good brake pads.
Remember, this is not your regular car and truck that has no load to it. More weight requires more power, and you will quite agree when you need a swift response from your towing vehicle when you hit the brake.
Comparison Table of Towing Brake Pads
|Bosch BC905 Ceramic Disc|
|Power Stop K6268-36|
|Power Stop K3167-36|
|Wagner Severe Duty SX756|
|Power Stop K5874-36|
|EBC Brakes DP31210C|
Whether you need to install new brakes, or you simply want to change your brake pads to an entirely different one, we have you covered in this buyer’s guide. We have decided to help you gather some of the ten best brake pads for towing as we tried before in CB radio reviews for truck.
If you are going to use your vehicle or truck for frequent heavy hauling or towing, then you need to get some of the best brands out there.
Some of the best brands customized for towing vehicles that offer twice the strength and efficiency are Bosch, Power, and Hawk performance brake pads. So, in no particular order, here are some of the best brake pads for towing.
10 Best Brake Pads For Towing Reviews & Buying Guideline
01. Bosch BC905 Ceramic Disc Brake Pad
- They are made with aluminum alloy in place of copper
- They last longer
- They have a decent, slim design
Bosch has a reputation for being one of the best brake pad makers. They have coverage, and productions spread across many countries on different continents and have come a long way. With their vast years of experience, they are able to provide top-notch brake.
This particular brake is made without copper, and that brings a more eco-friendly touch to the environment.
The brake pads made without copper also serve as a very innovative system that helps enhance the performance of the heavy-duty towing vehicle.
“However, these are not the regular brake pads, and they cannot fit every vehicle. They are made to work on a certain type of vehicles, and you should find if yours is a fit.”
Since it doesn’t work with copper, what does it work with? It is made from an alloy of aluminum. This alloy is the same type infused in aerospace engineering.
The technology also makes it excellent to work with the rotors of your vehicle, causing it to last longer than your normal brake pads.
It is made to resist corrosion, and it doesn’t generate noise when in use. Their riveting system is one carefully designed to allow for flexibility in movement too.
- They are very flexible
- They have a good design
- They are eco-friendly
- They don’t fit all vehicle
- They can cause a loss in mileage in the wrong vehicles
02. Power Stop K6268-36 Z36 Front and Rear Brake Kit
- Pads are made with ceramics
- It is a full feature brake kit
This is yet another brake pad that has its focus on increasing the performance of your truck or vehicle. It offers you the luxury of having the complete brake kit.
With this kit, you can have both your front and rear brake pads changed. Trust me, all the entire kit for the brake system can be found in this kit.
Part of what you can find in the kit, are the custom made power stop rotors, and towing brake pads. We all know how the ford series trucks are America’s most trusted truck brand. This kit is absolutely compatible with the truck.
“one thing you might not really enjoy about these brakes is that they do not contain brake calipers. You will have to purchase those after you get the power stop brake kit.”
The power stop brake kit provides you with an excellent power when you stop the truck, no matter the terrain you drive in.
The brake pads in this kit are made from ceramic and carbon fiber compound. This is the primary component for most of the power stop brakes.
Just like the bosch, they are also made to withstand corrosion. The rotors, on the other hand, are plated with zinc, not only for protection but to add beauty when fixed on your wheels.
- It is made to be resistant to corrosion
- Plated with zinc
- Incomplete brake kit
03. Bosch BSD964 964
- More layers for the shim
- Aerospace alloy
- Copper-free pads
- Specific to certain platforms
- Made with ceramic
Most of the brake pads made especially for towing vehicles are aimed at one thing. And that is efficiency and offering great stopping power.
Towing is not like regular driving and needs a respectable amount of power to be able to handle things. This Bosch brake pad is no exception when it comes to offering you great stopping power and efficiency.
You need to try out the brake pads; they are equally made without copper to deliver that touch of strength you need for your truck. This technology helps to reduce friction from the brake pads.
They are made to be severed heavy duty pads. That means they offer you more than two times the amount of power you would expect from a brake pad. The Bosch brake pad is made with a multi-layer shim system that helps boost the operations of the pads.
The design and fit make it very easy to be installed in the truck or vehicle of your choice. One thing you can be sure of is the fact that the brake pads are designed to give extra protection.
- Heavy-duty design
- Made with aerospace alloy
- Hardware included
- They are only meant for heavy-duty trucks
04. Power Stop K3167-36 Z36 Truck & Tow
- Made with ceramics pads
- Smooth slot design
- Upgraded bolt-on design
Searching for something specific to the RV, then this is the best match for it. The Power Stop K3167 is also made as an entire brake kit. They are specially customized for trucks.
If you have the RV, the four by four, the SUV, then this is the best pads for your truck. What you get with this brand apart from the usual brake pads are the rotors with enhanced hardware.
As an added feature, you also get both the front and rear axles. The ceramic design of the brake pads makes it very excellent when you need to use it for towing your vehicle. You will have a beautiful experience using.
“The only thing you might not like about the power stop rotor is that it wears out faster than it should. It might be a factor of purchasing a bad or defective kit, but make sure you pay attention”
When the brake pads from this kit are in use, you will experience a ride without friction caused by dust. What this also implies, in turn, is that you will have little or no noise when you ride, or tow. The rotors also have an upgrade to them.
They are bolt-on, and you will not need overpriced modifications to have them fixed on your truck. The rotors also have a special slot design that ensures the cooling and easy removal of dust and dirt retained on the break.
- Carbon-ceramic pad design
- Smooth rotor design for easy cleaning
- Made for heavy-duty trucks
- Wears out quickly
05. Wagner Severe Duty SX756 Semi-Metallic
- Made for heat
- Better pad development
If you are looking for a company that has been in the brake pad industry for a long time, you can look to Wagner. They have a history that goes way back to the 19thcentury. They have also been one of the most innovative brake pad makers from that time until now.
They sell only the best and quality brake pads that are excellent for CUVs, SUVs, and other little pickup trucks.
They are also very durable and can stand the test of time. Certain tests carried out showed that Wagner brake pads exceeded other brands by a lot of margins. Something to be proud of.
The technology with which the pads are produced makes it last even in hot conditions. This means that no matter the amount of heat evolved during a tow, the pads have a measure to be still efficient and long-lasting. They have a very good response when you hit your brake pedals.
One thing you should always be particular about is how much of power you can get from the pads, and this is one thing you are sure to get.
So whether you are going up and down the hill, or traveling a straight path, you can count on the Wagner brake pads.
- It is very easy to install
- They are very durable
- Made to withstand heat
- It is not for novices
06. Power Stop K5874-36 Z36 Brake Kit
- Features a technology against heat
- Shims design to insulate noise
As you can see, we have been talking about the power stop brake kit for a while because of how efficient they are. They are a symbol of quality and a mark of durability.
They have also been up and about making the most innovative and resourceful brake kits. The kit is made of brake rotors, the brake hardware, your calipers, your brake pads, as well as the sensors.
These are the basic components of the brake kit, but for the purpose of this buyer’s guide, we are going to be paying attention to the brake pads. One thing you can notice about this brand is how they are able to make both the brake pads and rotor fit perfectly.
The design of the pad makes it easy for you to slot them into your brake system. You are also bound to have very reduced, or no noise at all after you successfully slot it in.
Just like every great brake ad, the design enables you to clean the pad very easily after dust and dirt must have accumulated on the pads.
They are resistant to both corrosion and rust because they are coated with powder. When you purchase the power stop brake pads, you are sure to get the best.
- They are durable
- The pads can be installed by slotting
- They are flexible in trucks
- They reduce noise
- The pad cannot be bought alone
- You need to buy the entire kit
07. Motorcraft BRSD-756 Pad
- Insulated shim
- Hardware component
- Multi-layer steel shims
Here is another excellent brake pad that fits the description of being one of the best brake pads available out there.
If you are looking for a brake pad that has met all the standards of the federal vehicle safety, then Motorcraft is the one you are looking for.
They are brake pads that you can use for the front of your vehicle and offer stability as well as the power to your towing vehicle.
When you purchase this pad, you also get complete hardware with it. Even when you change the pad, you always get new hardware that you can replace with the old brake pad hardware.
What’s more? Well, you have a special design for the brake pads such that the shims do not allow noise.
The shims are multilayered thin pieces of steel that are integrated to help reduce noise. They also help to reduce the vibrations that are felt when towing.
They have slots that are not like the regular ones. The slot is what protects the pad from bending when they are subjected to extreme heat.
You also get the calipers when you purchase this pad. What you can be sure of with this design is nothing short of the standard.
- The pads can work in hot temperature
- They help reduce friction
- They also come with their hardware
- They are only meant for the front rear
08. Hawk Performance HB302Y.700
- OE technology for the shim
- Efficient stopping power
- Durable rotor and pad
Searching for something that appeals to both light and heavy trucks? Then you need to consider the Hawk performance brake pads and their excellence in design.
The first great feature of this brake pad is that you will have absolutely no issue whatsoever in trying to install them.
They are made for you to follow a simplified installation system. They also provide a tougher experience for you when you start to tow vehicles. They have a shaved design that helps to cut a lot on the noise generated during use.
“the only thing you might not like about it is that they are made for the front brake system alone.”
The special OE technology used in making the shim greatly reduces the vibrations of the pad when being used to tow They are also not made from copper; rather, they are made from Ferro carbon, which is an equally strong material.
The brake pads provide you with optimal performance, and can greatly increase your efficiency. Even when the temperature is high, you can still have the accurate protection for your brake pads with the grooves built-in into your brake pads.#
- Easy to install
- They are used for almost any truck
- Can be used on SUVs
- Work well in hot conditions too
- They are only made for the front
09. EBC Brakes DP31210C
- Reduced rotor damage
- Ceramic Pad
- Coated Pads
- Efficient in heat
There are not so many excellent brands for brake pads out there only a few. The EBC brake pads happen to be among the excellent few brake pads you can get in the market.
One thing you should notice first about the EBC is that they are made from ceramic and fit many different vehicles.
The friction technology is one such that you can only get the best stability because it does not compress when it is subjected to pressure.
One technology that is infused in the brake pad is the Kevlar material. This is a densely packed ceramic material that can be used instead of the regular metallic steel, and still offers the same and even more function.
“The only disadvantage you might get is that it is not really a low dust brake pad.”
The stopping power gotten from the brake pads are also very excellent. They have been tested and passed the test to become one of the trusted brands for providing brake solutions.
The Kevlar solution makes it easy for the brake pads to cool off easily, even during the toughest of situations.
This is also owing to the design of the rotors having perforations. Let’s not also forget the grooves designed in a way that allows the rotor to last for a longer period of time.
- Very easy to install
- Excellent for a wide range of trucks
- Improved design
- Durable pads
- Strong stopping power
- They are not dust free/low dust
10. ACDelco 14D785CH
- Simple but efficient shim design
- Organic components
- Ceramic pads
Finally, on our list of the best brake pads for your vehicle, we have the ACDelco brake pads. They are made entirely from ceramic and offer a very great deal of stopping power when in use.
They are also made with semi-metallic and organic constituents that make it very durable.
These components put together are the things that make it very efficient and provide all the energy and power needed during a heavy hauling. Trust me; these pads can satisfy use in a wide range of vehicles.
“These brake pads do not offer as much flexibility as the others, but they can be used on different trucks.”
And the best part of it all is that you do not have to install it mechanically. The installation process is something you can do yourself.
And if you give your mechanic to help you with it, you don’t have to pay so much as compared to the machining brake pads.
The shims are also designed to reduce the amount of noise felt or heard during use. The slot design and chamfers help to curb the vibrations.
This brake pad is one of the best you can get to make your truck brake pad experience goodness in the brake system.
- Very durable brake pads
- Easy to install
- No machining required
- Can be used on many different trucks
- Does not offer as much flexibility
Buying Consideration of Best Brake Pads For Towing
Here, we are going to be giving you some things you should use as the criteria to choose the most suitable brake pad for your car.
Even if you feel you should get a certain brake pad for your vehicle. You need to pay attention to some factors before deciding.
We have gathered a list of things we strongly recommend you consider before running off to get a new brake pad for your towing vehicle.
In our other article, we discussed brake pads comparison you may check to gather more idea.
In simple terms, the stopping power refers to the amount of power you need to stop the car when you are towing.
The power is dependent on either the movement/speed of the vehicle or the weight it now has due to the action of towing. Sometimes, both properties can affect the stopping power of the brake pads.
A good brake is one that can provide you with the right amount of stopping power when your towing vehicle is in full throttle and working hard to tow another vehicle or object.
There is something called the coefficient of friction. This refers to the energy needed to pull an object on a flat surface against the weight of the object.
If you have brake pads that offer a good coefficient of friction, then you have ease doing your job.
But if it turns out that your break has a low coefficient of friction, your entire body would suffer from the stress you give yourself while trying to tow an object.
Slot and Chamfers
The chamfers and slots can also be very important if you need something that has reduced noise.
The design or shape of the brake pads also plays an important role in telling how the efficiency of the brake pads would be in respect of reducing the noise experienced.
Make sure you pay attention to the slot and chamfer type because it can help the performance of your brake at times of high temperature.
It is possible for you to have brake pads with no noise at all. You need to carry out your research on that one to discover the best brands that offer low noise.
If you read throughout the buyer’s guide, you will notice that we have mentioned quite a few.
Towing brake pads are far more different from the regular brake pads because they are used for things that require more power.
So if you need something good, you need to look for brake pads that offer superior, and premium lining against brake dust as well as noise.
The Material Used For Friction
When trying to choose a brake pad, you need to choose the type that suits your vehicle. There are basically two types of friction materials. You can have the riveted or bonded. You can also have both of them carefully placed together.
The riveted brake design has the lining connected to the pad by means of copper or aluminum, but most innovative pads now use different materials apart from copper for durability.
This lining and riveting help to reduce the noise by absorbing the vibrations when it is in use. You will also notice that most of the brake pads available use this riveting technique.
This method uses a very high-strength adhesive at a high temperature to attach the friction material to the pad.
With this technique, you can be sure to enjoy more pad life because there is more room for the lining wear even before it wears out to the point of touching the rotor.
They are not, however, as flexible as the riveted pads. Don’t let this one feature alone grab your attention. Be sure to contact your mechanic for more details.
Frequently Ask Questions of Top Quality Brake Pad For Towing
When is the best time to replace my brake pads?
There is no particular rule to replacing your brake pads. You can replace it according to the mileage covered, or you can simply wait till you start to feel a drop in the brake power.
Whichever comes first. If you want to go the mileage way, you should be able to change the pads when you hit about 30,000 – 60,000 miles.
This way, you are sure you are doing the right thing. If you want to go the other way, you can simply keep hoping that your vehicle still has its brake pads intact.
At the signs of defects, you need to start acting too. Once you notice a bruised spot, a car pulls when you apply the brake, unnecessary heat evolving from your rotor, brake pad dust, and other things. These are obvious signs you need to look at to make the right decision.
To save on cost, can I reuse my brake rotors?
The only time this question will get a yes is when you have tested the rotor with a micrometer and confirm that it is in good condition. This goes to say that even new rotors can be useless if you do not ascertain their authenticity with a micrometer.
So even if your rotors still sparkle and look new, you should never use them if they are old. Do a thorough check on the so-called “new rotors” you also purchase to make sure you don’t get in trouble later.
Can I use the front brake pads for the rear part of my car?
You should never interchange the brake pads at any time. There is a reason why they are both marked front and rear, and we want to respect that reason. Once you purchase a brake pad and it says front, you should not try to use the brake pad for the rear part of your car.
Only use them according to the way they are labeled. If you must replace your rear brake pads, be sure to go get the ones that are marked specifically for the rear.
When installing the brake pads, the order of arrangement is immaterial. What this means is that once you want to fix your brake pad for the front, you can use any of the two. Both are meant for either side.
How many times in a year do I need to change my brake pads?
The frequency of change is solely dependent on you, your truck type, your driving style and what object you carry. Ideally, there is no rule of thumb, but it is essential to change the pads as soon as you see certain defects in your rotor and pads.
You also need to change the pads as soon as the odometer hits a certain mileage value.
So in a year, you can change it more than twice. Depending on how you are able to use the vehicle, and the nature of what you used it for.
Why do I need to grease the back of my brake pads?
The most important reason why you need to grease your pads is for you to avoid rattling between the pad and the caliper. This would, in turn, ensure that your pads will last longer.
In conclusion, this information is not void of certain essential things you need to know about your car.
You should be able to buy the best brake pads for your towing vehicle, but relax and make sure it is in line with the type of car you use.
You can take time to research and see what exactly needs to start and settle with. So remember, in all of your research, be sure to make sure you do not leave the context of these things.
Get something that has efficiency and would be a great measure of value.
We hope that the information provided above will serve you well and you will be able to use it in making the best decision for your car. We also want you to pay special attention to how well you can improve the durability of your vehicle by using only the right material.
The information will guide you into making accurate choices when it comes to choosing something for your brake pad.